Replace the cover and reinstall the screws, as described in
Replacing the Cover
.
Your computer automatically recognizes the new drive and configures itself accordingly when you
turn it on. Partition and format the new drive following the instructions provided with the drive.
Replacing the Cover
Align the three-sided outer panel over the chassis and lower it onto the unit. Be sure to slide the
panel onto the unit so that the tabs slip into the lips on the unit.
Replace the three screws at the center top, lower-left corner, and lower-right corner of the metal
backplate.
Replace the frame by inserting the three small tabs into the slots on the left side of the unit and
slipping the two larger tabs into the slots on the right side of the unit. Gently press the frame until
it clicks into place.
© 2000 Sony Electronics Inc. Reproduction in whole or in part without written permission is
prohibited. All rights reserved. Sony, VAIO, and the VAIO logo are trademarks of Sony. All other
trademarks are trademarks of their respective owners.
Page 354