Attach any internal cables that the board requires (see the manual for the add-in board).
Replace the cover and reinstall the screws as described on
Replacing the Cover
.
Connect all peripheral devices and AC power, and then turn on the computer.
Adding Memory
The computer has two memory slots. For memory upgrades, use only 3.3V 64-bit PC-100 SDRAM
DIMM modules. Sony computer supplies, accessories, and peripherals can be purchased from your
dealer or by contacting Sony at
http://www.sony.com/accessories
.
To install memory
Make sure you observe the proper safety precautions when you add DIMMs to your Sony computer. See
Notes on Use
in the
VAIO
®
Consumer Information Guide
.
Shut down your computer and turn off all peripheral devices, such as your printer.
Unplug your computer and any peripheral devices.
Remove the cover as described in
Removing the Cover
.
If necessary, remove any cables, add-in cards, or other components to access the DIMM
sockets.
Handle the DIMM only by the edges, and remove it from its anti-static package.
Locate the keys on the bottom edge of the DIMM .
Align the DIMM over the socket.
To avoid damaging the DIMM socket, move the DIMM socket tabs slightly outward to relieve pressure. The
DIMM should then click easily into place.
Page 329
