UFOELK - 2/21/2018 5:48 PM
PCM-D100
9
2-4. LCD ASSY (LCD1)
Insert is straight to the interior.
Insert is incline
LCD flexible
board
connector
connector
LCD flexible
board
OK
NG
Note:
When installing the LCD flexible board,
check that it have inserted straight.
No slanting after insertion.
2
two stoppers
(M1.7
u
3.0)
3
two screws
4
LCD assy (LCD1)
1
LCD flexible board
(CN4205)
– Front top view –
2-5. KNOB (REC VOL) (L) BLOCK, SPACER (REC VOL) B
2
three claws
3
ornament (REC VOL)
5
knob (REC VOL) (L) block
6
spring
(knob REC L)
7
spacer
(REC VOL) B
spacer (REC VOL) B
rib
shaft
hole
1
open the
guard
(REC).
ornament (REC VOL)
five holes
0
1
2
3
4
5
6
7
8
9
10
– Front top view –
shaft
Note 1:
When installing the ornament (REC VOL), align this claw
with the position of “0” mark of the knob (REC VOL) block.
Note 4:
When installing the spacer (REC VOL) B,
arrange the rib outside.
Note 3:
When installing the knob (REC VOL) block,
align the shape of hole and the shape of shaft.
knob (REC VOL)
(L) block
knob (REC VOL) (L) block
Note 2:
When installing the ornament (REC VOL),
align five bosses and five holes.
“0” mark
Ornament (REC VOL) setting
Ornament (REC VOL) setting
Knob (REC VOL) block setting
4
washerhead screw
(P
M1.4
u
3.5)
rib
