background image

Precautions and Procedures 

   

Sony recommends that memory upgrades be performed by an authorized Sony Service Center. To find the

nearest center or agent, go to: 

http://www.sony.com/pcsupport

The procedures described below assume familiarity with the general terminology associated with personal computers and
with the safety practices and regulatory compliance required for using and modifying electronic equipment. When installing
a memory module in your computer, make sure you read the proper safety precautions below. Mistakes that occur when
installing or removing a memory module may cause a malfunction. 

Turn off the computer. Disconnect the computer from its power source and from any telecommunications links,
networks, or modems before you install or remove a memory module. Failure to do so may result in personal injury
or equipment damage. 

Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of
the computer, will result in damage to the computer. 

Electrostatic discharge (ESD) can damage disk drives, memory modules, and other components. Perform the
procedures described below only at an ESD workstation. If such a station is not available, do not work in a carpeted
area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground
yourself by momentarily touching an unpainted metal object that is grounded, such as a pipe, radiator, or faucet. 

Do not open the memory module package until you are ready to install the module. The package protects the
module from ESD. 

Use the special protective package to store a memory module and prevent ESD. 

Only use memory modules that are compatible with your computer. For the type of module and amount of memory
installed on your computer, go to http://www.sony.com/pcsupport to find and view the VAIO

®

 Computer

Specifications. If you wish to purchase a memory module, shop Sony online at 

http://www.sonystyle.com/vaio

 or

contact your local retailer. 

Page 142

Содержание PCG-K27 - VAIO - Mobile Pentium 4 3.06 GHz






















































































































































Отзывы: