Sony PCG-887M, Инструкция по эксплуатации

Страница: 92 / 112

Sony
Notebook U
s
er Guide
Getting help
91
n N
About peripherals
I cannot establish an i.LINK™ connection between two VAIO computers
❑ Disconnect then reconnect the i.LINK™ cable. If you still have no connection after waiting for a while,
restart both computers.
❑ If either computer has just returned from a power saving mode, the connection may be affected. In this
case, make sure you perform a full restart before connecting them.
I cannot use DV devices. The message 'DV equipment seems to be disconnected or turned off' appears
❑ Check that the DV device is turned on and that the cables are properly connected.
❑ If you are using multiple i.LINK™ devices, the combination of the connected devices may cause unstable
operation. In this case, turn off the power of all connected devices and disconnect unused devices. Check
the connection and then turn on the power again.
❑ Use manual import/export in DVGate motion if problems occur with third party cameras.
❑ You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with
the i.LINK™ devices.
My PC Card is not working
❑ Make sure the PC Card is compatible with your version of Windows
®
.
❑ Use the Sony Notebook Setup utility to disable devices you are not currently using.
❑ If you are using two PC Cards, use the Sony Notebook Setup utility to disable the devices you are not
currently using.
I cannot print
❑ Check that the printer cables are correctly connected.