Sony NSS-S2, Руководство по установке

Страница: 30 / 40

2-4 (E)
NSS-S2
LEDs
Ref. No. Address Indication Name Function Normal state
color (When connect to
the MPU-136 board)
D1503 (A-3) Red + 12 V_IN_ERROR Lights when the voltage immediately after the fuse Lights off
of
+ 12V input from the power supply is lower than
the specified value.
D1504 (A-3) Red + 3.3 V_ERROR Lights when the DD converter output voltage Lights off
( + 3.3 V) is lower than the specified value.
D1505 (A-3) Red + 3.3 V_FPGA_IO_ Lights when the output voltage (+3.3 V) after the Lights off
ERROR MAIN/BBU selection LSI is lower than the
specified value.
D1506 (A-3) Red + 1.5 V_FPGA_ Lights when the series regulator output voltage Lights off
CORE_ERROR (+1.5 V) is lower than the specified value.
D1507 (A-3) Red + 2.5 V_FPGA_DDR_ Lights when the DD converter output voltage Lights off
ERROR (+2.5 V) is lower than the specified value.
D1508 (A-3) Red + 1.25 V_FPGA_DDR_ Lights when the DD converter output voltage Lights off
VTT_ERROR (+1.25 V) is lower than the specified value.
D1509 (A-2) Red + 5.0 V_ERROR Lights when the DD converter output voltage Lights off
(+5.0 V) is lower than the specified value.
D1510 (A-2) Red + 1.2 V_SAS_CORE_ Lights when the DD converter output voltage Lights off
ERROR (+1.2 V) is lower than the specified value.
D1601 (A-2) Blue MPU_CLK0_BLINK For checking the CLK0 signal input from the Blinking
MPU-136 board. Blinks when a clock is input.
D1602 (A-2) Blue MPU_CLK1_BLINK For checking the CLK1 signal input from the Blinking
MPU-136 board. Blinks when a clock is input.
D1603 (A-2) Blue MPU_CLK2_BLINK/ For checking the CLK2 signal input and CFPGA Blinking
CFPGA_LIFE_BEET configuration completion.
Blinks when configuration is complete.
D2010 (F-1) Red HOT_PLUG_ERROR0 Lights when an error occurs on the channel 0 Lights off
side of HOT PLUG LSI.
D2304 (E-3) Red + 3.3 V/ + 1.2 V_SAS_ Lights when an error occurs in the DD converter Lights off
CORE_DD CON_ERROR LSI that gen3.3 V/+1.2 V.
D3201 (A-7) Blue ETHERNET_FAST0_ Lights when Fast Ethernet PHY establishes a link Lights off
FULLDUPLEX in Full Duplex.
D3202 (A-7) Blue ETHERNET_FAST0_ Lights when the link speed of Fast Ethernet PHY Lights off
SPEED100 reaches 100M (100Base-TX).
D3203 (A-7) Blue ETHERNET_FAST0_ Blinks when Fast Ethernet PHY is accessing data Lights off
ACTIVITY (send or receive).
D3204 (A-7) Blue ETHERNET_FAST0_LINK Lights when Fast Ethernet PHY establishes a link. Lights off
D3501 (C-9) Red FIBERCHANNEL_ Lights when the port 0 side of FibreChannel is not Lights on
PORT0_FOULT connected, or no link is established.
D3502 (C-9) Green FIBERCHANNEL_ Blinks when the port 0 side of FibreChannel is Lights off
PORT0_ACTIVITY accessing data (send or receive).
D3503 (D-9) Red FIBERCHANNEL_ Lights when the port 1 side of FibreChannel is not Lights on
PORT1_FOULT connected, or no link is established.
D3504 (D-9) Green FIBERCHANNEL_ Blinks when the port 1 side of FibreChannel is Lights off
PRTR1_ACTIVITY accessing data (send or receive).
D3505 (D-9) Blue FIBERCHANNEL_LSI_ Blinks when the FibreChannel LSI is ready to start Blinking
LIFEBEET operation (or when an error code is output when
an error occurs).
D3507 (E-7) Blue FIBERCHANNEL_LSI_ For design purpose Lights off
BLUELED
D4001 Side B Green IFPLD_CONFDONE IFPLD output. Lights when the RAID FPGA data Lights on
(G-8) output is complete.
D4501 (G-9) Green RAID_FPGA__STATUS0 Circuit board operation status. When the two PU- Lights on or off
124 boards are installed, the operation side lights
up and the backup side lights out.