Sony MZ-R701, Руководство по обслуживанию

Страница: 24 / 50

24
MZ-R701/R701DPC
SECTION 6
DIAGRAMS
6-1. IC PIN DESCRIPTIONS
• IC501 SN761057ADBT (RF AMP, FOCUS/TRACKING ERROR AMP)
Pin No. Pin Name I/O Description
1 TE O Tracking error signal output to the system controller (IC801)
2 REXT — Connect terminal to the external resistor for ADIP amp control
3 WPP-LPF — Connect terminal to the external capacitor for TPP/WPP low-pass filter
4 VREF O Reference voltage output terminal (+1 V)
5 C I Signal (C) input from the optical pick-up detector
6 D I Signal (D) input from the optical pick-up detector
7 D-C I Signal (D) input from the optical pick-up detector (AC input)
8 Iy I I-V converted RF signal (IY) input from the optical pick-up detector
9 Ix I I-V converted RF signal (IX) input from the optical pick-up detector
10 Jx I I-V converted RF signal (JX) input from the optical pick-up detector
11 Jy I I-V converted RF signal (JY) input from the optical pick-up detector
12 A I Signal (A) input from the optical pick-up detector
13 A-C I Signal (A) input from the optical pick-up detector (AC input)
14 B I Signal (B) input from the optical pick-up detector
15 TON-C — Connect terminal to the external capacitor for TON hold
16 CIG —
Connect terminal to the external capacitor for the low-pass filter of NPP divider
denominator
17 CDN —
Connect terminal to the external capacitor for the low-pass filter of CSL divider
denominator
18 PD-I I Light amount monitor input terminal (invert input)
19 PD-NI I Light amount monitor input terminal (non-invert input)
20 PD-O O Light amount monitor output terminal
21 ADIP O ADIP duplex FM signal (22.05 kHz ± 1 kHz) output to the system controller (IC801)
22 DVDD — Power supply terminal (+2.3 V) (digital system)
23 SBUS I/O SSB serial data input/output with the system controller (IC801)
24 SCK I SSB serial clock signal input from the system controller (IC801)
25 XRST I Reset signal input from the system controller (IC801) “L”: reset
26 OFTRK I Off track signal input from the system controller (IC801)
27 DGND — Ground terminal (digital system)
28 BOTM O
Bottom hold signal output of the light amount signal (RF/ABCD) to the system
controller (IC801)
29 PEAK O
Peak hold signal output of the light amount signal (RF/ABCD) to the system
controller (IC801)
30 VREF075 — Connect terminal to the external capacitor for the internal reference voltage
31 VC O Middle point voltage (+1.2 V) generation output terminal
32 CCSL2 — Connect terminal to the external capacitor for TPP/WPP low-pass filter
33 RF OUT O Playback EFM RF signal output to the system controller (IC801)
34 AGND — Ground terminal (analog system)
35 to 37 EQ, LP, PS — Connect terminal to the external capacitor for the RF equalizer
38 AVCC — Power supply terminal (analog system) (+2.3 V)
39, 40 OFC-2, 1 — Connect terminal to the external capacitor for RF AC coupling
41 ABCD O Light amount signal (ABCD) output to the system controller (IC801)
42 FE O Focus error signal output to the system controller (IC801)
43 S-MON O Servo signal monitor output to the system controller (IC801)
44 ADIP-IN I ADIP duplex FM signal (22.05 kHz ± 1 kHz) input terminal