20
Using Auto Time Stamp to add
track marks while recording
When the elapsed recording time
exceeds the time interval for Auto
Time Stamp:
From that point the recorder adds a track
mark whenever the time interval has
elapsed.
Example: 8 minutes of recording has
already been done when an Auto Time
Stamp time interval of 5 minutes is set.
A track mark will be added at the 13-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
When the time interval set for Auto
Time Stamp exceeds the elapsed
recording time:
The recorder adds a track mark when the
set Auto Time Stamp time interval has
elapsed.
Example: 3 minutes of recording has
already been done when an Auto Time
Stamp time interval of 5 minutes is set
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
Notes
•
Automatic track marking by Auto Time Stamp
starts when you add a normal track mark to
the disc (i.e., by pressing T MARK or
X
,
etc.).
•
The setting will be lost when the recording
stopped.
Adjusting the recording
level manually
(Manual recording)
When you record, the sound level is
adjusted automatically. If necessary, you
can set the level manually.
Note
Adjust the recording level while the recorder is
in standby mode. You cannot adjust it while
recording.
1
Press REC while pressing
X
.
The recorder stands by for recording.
2
Press MENU/ENTER, press
SELECT
>
/
.
repeatedly until
“RecVol” flashes in the display, and
then press MENU/ENTER again.
3
Press SELECT
>
/
.
repeatedly
until “Manual” flashes in the display,
and then press MENU/ENTER.
To switch back to the automatic
control, Press SELECT
>
/
.
repeatedly until “Auto” flashes in the
display, and then press MENU/
ENTER.
4
Play the source.
REC
MENU/ENTER
X
SELECT
>
/
.
