Sony MZ-NH700, Руководство по эксплуатации, Страница: 91 / 128

91
DC IN TOO
HIGH • Voltage of the power supply is too high (The supplied AC power adaptor
or the recommended car battery cord is not used).
,
Use the supplied AC power adaptor or the recommended car battery
cord.
DISC FULL • Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
,
Replace the disc.
D-L READY • MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to “Software Operation” section.)
EJECT DISC OK • The recorder has finished communicating with the computer and it is safe
to eject the disc from the recorder or disconnect the dedicated USB cable.
End • The recorder reached to the end of the disc while playing or pressing
>
.
ERROR • There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 89.
ERROR XX • There is an internal malfunction in the system.
,
Restart the operation by doing steps 1 to 3 on page 89. If the message
appears again, please consult your nearest Sony dealer.
FORMAT
ERROR DISC • A disc with a format that the recorder does not support was inserted.
• A disc formatted on the computer was inserted.
,
Insert a standard MD or a disc used in Hi-MD mode.
,
When formatting a disc on the computer, make sure to use the
SonicStage software.
GROUP FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a standard disc.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a standard disc) on a disc. Keep the group number
within 255 or 99.
HOLD • The recorder is locked.
,
Slide HOLD against the arrow to unlock the recorder (page 16).
IN MENU • You pressed a key on the remote control while selecting a menu on the
recorder.
LOW BATTERY • A battery is weak.
,
Charge the rechargeable battery or replace the dry battery (page 15).
MEMORY
OVER • You tried to record with the recorder placed where it receives continuous
vibration.
,
Put the recorder on a stable place, and start recording again.
NAVIGATION • You pressed a key on the remote control while selecting the Main play
mode on the recorder.
• You pressed a key on the recorder while selecting the Main play mode on
the remote control.
NO BATTERY • Recharging was attempted with a non-rechargeable battery inserted.
, Insert a rechargeable battery and start the charging process again.
NO
BOOKMARKED
TRACK • You selected bookmark play without setting bookmarks.
,
Set bookmarks (page 44).
Message Meaning/Remedy