Sony MZ-NH700 Скачать руководство пользователя страница 90

Страница: 90 / 128

Messages

If the following messages flash in the display window, check the chart below.

Message

Meaning/Remedy

AVLS NO
VOLUME
OPERATION

• AVLS is set to “AVLS On” and so the volume cannot rise higher.

Set AVLS to “AVLS Off” (page 68).

BLANKDISC

• A disc with no recording on it is inserted.

BUSY WAIT A
MOMENT

• The recorder is accessing disc information.
• You tried to operate the recorder while it was accessing the recorded data.

Wait until the message goes out (in rare cases, it may take a few
minutes).

CANNOT EDIT

• You selected, “Group Set”, “GroupRelease”, “Move”, or “Erase” while

recording.

• You tried to erase the track mark at the beginning of the first track or

group.

• You tried to erase a track mark to combine tracks the recorder cannot

combine (a track recorded in stereo and in mono, for example).

• You tried to overwrite a track marks.
• You tried to change a title that includes characters the recorder cannot edit.

Editing titles cannot be done if the title includes characters that cannot
be input on the recorder.

CANNOT
OPERATE

• You tried to press

or T MARK during synchro-recording.

CANNOT
RECORD OR
PLAY

• There is no audio data that can be played on the recorder.
• The audio data or disc management file has been damaged.

Erase the whole disc (page 64) or perform the Format function
(page 67).

CANNOT SET

• You tried to make the Time Mark setting during synchro-recording.
• You selected “RECVolume” while the recorder is not in recording-pause.

Set “RECVolume” while the recorder is in recording-pause.

• You tried to make the following settings while recording.

— Disc Memory
— Play mode
— Recording mode
— Recording level
— Selection of “

:REC” in menu

CHARGE

C–35

41F–95F

• You tried to charge the rechargeable battery at a place with a temperature

outside the specified range for the recorder.

Charge the battery at a temperature of +5

C (+41

F) to +35

(+95

F).

Charging

• The rechargeable battery is being charged.

DATA SAVE

• The recorder is writing information to the system file, such as the recorded

data or editing information.

Wait until the message disappears from the display.

Содержание MZ-NH700

































































































































Результаты поиска

Содержание MZ-NH700

Отзывы:

Sony MZ-NH700, Руководство по эксплуатации, Страница: 90 / 128

Результаты поиска

Содержание MZ-NH700

Отзывы: