Sony MZ-NH700, Руководство по эксплуатации, Страница: 88 / 128

88
Even though the
recorder is
recognized by the
computer, it does not
operate normally. • A USB hub is used.
, Connect the dedicated USB cable directly to the USB port of the
computer.
• You are using the recorder at a place with vibration.
, Use the recorder at a place with no vibration.
The recorder cannot
be used as a storage
device. • The SonicStage or MD Simple Burner software is active.
, Close the SonicStage or MD Simple Burner software.
• A standard disc is inserted.
, Insert a disc used in Hi-MD mode. Only discs used in Hi-MD
mode can be used as a storage media.
The playing time of a
transferred track is
different from the time
that appears on your
computer monitor. This is due to a calculation discrepancy between the recorder and the
computer.
You cannot transfer
tracks that will fill
up the remaining
recording time on
the disc. • The minimum recordable time on a disc is normally 2 seconds in
stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo
mode. When you transfer a track from your computer, the recorder
needs a 2-second (or 4- or 8-second) space for a track even if the track
is under 2 seconds (or 4 or 8 seconds) in length. Also, the recorder
inserts a 2-second (or 4 -or 8-second) space in between tracks during
transfer operation. For this reason, the recorder needs an additional 6
seconds (or 12 or 24 seconds) for each track. This reduces the
maximum recording time for each track by 6 seconds (or 12 or 24
seconds) during transfer operation (in MD mode only).
The disc size displayed
on the computer is not
the same as the disc
size printed on the disc. • The difference is due to the use of the binary system to indicate the
disc size on the computer and the decimal system to express the disc
size on the disc and other recording media. For details on the disc size,
see page 77.
You cannot operate
the recorder (“PC –
–MD” appears). • You cannot operate the recorder while the recorder is connected to the
computer.
The lid does not
open. • It happens if you disconnect the dedicated USB cable in the middle of a
data transfer, recording, or editing operation on the computer, but while
the rechargeable battery is missing from the recorder or is drained.
,
Reconnect the dedicated USB cable or insert a fully charged
rechargeable battery into the recorder, and then press
x .
Symptom Cause/Remedy
Others
Symptom Cause/Remedy
Some menu items
cannot be displayed. • “Menu Mode” is set to “Simple”.
, Set the “Menu Mode” to “Advanced” to display all the menu items.
The recorder does not
work or works poorly. • The rechargeable battery is not charged.
,
Charge the rechargeable battery.
• The volume is low.
,
Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.