36
6-4. Auto Check
(See page 39)
Start
YES
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
Replace IC195
Replace OP or IC195
Replace IC101, IC195, or D101
11. Iop NV SAVE (See page 42)
Replace OP, IC190, or IC195
Replace OP, IC102, IC190,
or IC195
Replace OP, IC101, IC151,
or IC195
Replace OP
Replace the spindle motor
End adjustments
After turning off and then on the power,
initialize the EEPROM
For details, refer to 10. WHEN MEMORY NG IS
DISPLAYED (See page 33)
• Abbreviation
OP: optical pick-up
7. INITIAL SETTING OF ADJUSTMENT VALUE
(See page 41)
9. TEMPERATURE COMPENSATION OFFSET
ADJUSTMENT (See page 41)
10. LASER POWER ADJUSTMENT (See page 41)
12. TRAVERSE ADJUSTMENT (See page 42)
13. FOCUS BIAS ADJUSTMENT (See page 43)
16. AUTO GAIN CONTROL OUTPUT LEVEL
ADJUSTMENT (See page 44)
OP change in Err Display mode
Iop write
Spindle change in Err Display mode
Adjustment flow
