Sony MVS-8000X System, Руководство пользователя

Страница: 1008 / 1310

Chapt
er
1
7
F
iles
1008
Saving Files Recalled by Autoload
Saving Files Recalled by Autoload
If you save effect setting data, frame memory image files and so on in the
PWON_LD directory on the hard disk, then when the system is powered on this
data is recalled automatically. This is known as the autoload function.
To save the data to be recalled by the autoload function, use the menu for
operations on individual files.
For the data recalled by the autoload function, see “Saving data recalled by
autoload” (page 982).
For the setting enabling or disabling the autoload function, see “Setting
Automatic Loading of Register Data at Power On (Autoload Function)” in
Chapter 18 (Volume 3).
For example, to save snapshot data, use the following procedure.
1
In the File menu, select VF3 ‘Snapshot’ and HF1 ‘Snapshot.’
The Snapshot menu appears.
2
In the device selection area on the left, select [Register].
3
In the device selection area on the right, select [HDD].
Be sure to select [HDD] as the saving destination.
4
Select the PWON_LD directory.
The PWON_LD directory is automatically created when [Power On File
Load] is set to On in the System >Start Up menu. If set to Off, the directory
does not appear.
5
Using any of the following methods, select the data to be saved, and the
file in which to save it.
• To select all files within the list, press [ALL] below the list.
• To select multiple files, turn the knobs to select in the following ranges.
Knob Parameter Adjustment Setting values
1 List L Select the first register whose data
is to be saved 1 to 99
2 List R Select the first file to which data is to
be saved 1 to 99
3 Num Number of registers to be selected 1 to 99