Sony MHC-V77W, Руководство по эксплуатации

Страница: 54 / 64

54
US
MHC-V77W.US.4-695-546- 12 (1)
The BLUETOOTH device cannot
detect the system, or “RF OFF”
appears on the display.
•
•
Set the BLUETOOTH/Wi-Fi
signal to “WIFI OFF” or “RF ON”
(page 48).
Connection is not possible.
• •
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
•
•
Enable the BLUETOOTH function of
the BLUETOOTH device.
•
•
Establish a connection from the
BLUETOOTH device.
•
•
The pairing registration
information has been erased.
Perform the pairing operation
again.
The sound skips or fluctuates, or
the connection is lost.
•
•
The system and the BLUETOOTH
device are too far apart.
•
•
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
•
•
Increase the volume on your
BLUETOOTH device first, then
adjust the volume using VOL +/–.
There is severe hum, noise, or
distorted sound.
•
•
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
•
•
Turn down the volume of the
connected BLUETOOTH device.
Network connection
The system cannot connect to the
network. (Other equipment on the
network cannot find or recognize
the system.)
•
•
Check that is lit on the display.
•
•
It takes about 2 minutes for the
system to acquire an IP address
when the system is turned on in
a communication environment
without a router.
•
•
When you use a fixed IP address,
the same IP address may be
used by other equipment. Use a
different IP address.
The system cannot connect to the
network via a wireless LAN
connection.
• •
If a network (LAN) cable is
connected to the system, the
system automatically operates to
establish a wired LAN connection.
If you wish to use a wireless LAN
connection, do not connect a
network (LAN) cable to the system.