63
GB
Additional Inf
orma
tion
MHC-V50D.GB.4-689-512-
12
(1)
•
•
Depending on the order in which
you connect the TV and the
system, the system may be muted
and “MUTING” lights up on display
of the unit. If this happens, turn on
the TV first, then the system.
•
•
Set the speakers setting of the TV
(BRAVIA) to Audio System. Refer to
the operating instructions of your
TV on how to set the TV.
The sound is output from both the
system and the TV.
•
•
Mute the sound of the system or
the TV.
•
•
Change the speaker output on the
TV to TV speaker or Audio System.
The Control for HDMI function
does not work properly.
•
•
Check the connection with the
system (page 17).
•
•
Enable the Control for HDMI
function on the TV. For details,
refer to the operating instructions
of your TV.
•
•
Wait a while, then try again. If you
unplug the system, it will take
a while before operations can
be made. Wait for 15 seconds or
longer, then try again.
•
•
Make sure the TV connected to
the system support the Control for
HDMI function.
•
•
The type and number of devices
that can be controlled by the
Control for HDMI function is
restricted by the HDMI CEC
standard as follows:
•
—Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
•
—Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3 devices (this system uses one
of them)
•
—Tuner-related devices: up to
4 devices
•
—Audio system (receiver/
headphone): up to 1 device
(used by this system)
Party Chain
Party Chain function cannot be
activated.
•
•
Check the connections
(page 49).
•
•
Make sure the audio cables are
connected correctly.
“PARTY CHAIN” is flashing on the
display.
•
•
You cannot select AUDIO IN
function if you make connection
(page 49) during Party Chain
function. Select other function
(page 51).
•
•
Touch PARTY CHAIN on the unit.
•
•
Restart the system.
Party Chain function does not
work properly.
•
•
Turn off the system. Then, turn it
back on again to activate the Party
Chain function.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the keys on the touch panel of
the unit to perform this operation.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press
to turn on the system.