Sony MHC-RG88 Скачать руководство пользователя

Страница: 25 / 28

MHC-RG88 E2, E51 4-238-410-

(1)

Troubleshooting

Speakers

Sound comes from only one channel or
unbalanced left and right volume.

• Check the speaker connection and speaker

placement.

Sound lacks bass.

• Check that the speaker’s + and – terminals are

connected correctly.

CD Player

The disc tray does not open and “LOCKED”
appears on the front panel display.

• Contact your Sony dealer or local authorized

Sony service facility.

The disc tray does not close.

• The CD is not placed properly.

The CD does not play.

• The CD is not lying flat in the disc tray.

• The CD is dirty.

• The CD is inserted label side down.

• Moisture condensation has built up. Remove the

CD and leave the system turned on for about an
hour until the moisture evaporates.

Playback does not start from the first track.

• The player is in Program Play or Shuffle Play

mode. Press PLAY MODE repeatedly until
“1 DISC” or “ALL DISC” appears.

“OVER” is displayed.

• You have reached the end of the CD. Press

Tape Deck

The tape does not record.

• The tab has been removed from the cassette,

cover the broken tab with adhesive tape.

• The tape has reeled to the end.

The tape does not record nor play or there is a
decrease in sound level.

• The heads are dirty. (See “Cleaning the tape

heads” on page 26).

• The record/playback heads are magnetized. (See

“Demagnetizing the tape heads” on page 26).

The tape does not erase completely.

• The record/playback heads are magnetized. (See

“Demagnetizing the tape heads” on page 26).

There is excessive wow or flutter, or the sound
drops out.

• The capstans or pinch rollers are dirty. (See

“Cleaning the tape heads” on page 26).

Noise increases or the high frequencies are erased.

• The record/playback heads are magnetized. (See

“Demagnetizing the tape heads” on page 26).

Tuner

There is severe hum or noise (“TUNED” or
“STEREO” flashes in the display).

• Adjust the antenna.

• The signal is too weak. Connect an external

antenna.

A stereo FM program cannot be received in
stereo.

• Press FM MODE so that “MONO” disappears.

If other troubles not described above

occur, reset the system as follows:

Press

, ENTER and

?/1

at the same

time.

Unplug the power cord.

Plug the power cord back in.

Press

?/1

to turn on the power.

The unit is reset to factory settings. All the
settings are cleared.

Содержание MHC-RG88





























Результаты поиска

Содержание MHC-RG88

Отзывы:

Похожие инструкции для MHC-RG88

Бренды по названию

Популярные бренды

Sony MHC-RG88, Руководство по эксплуатации

Результаты поиска

Содержание MHC-RG88

Отзывы:

Похожие инструкции для MHC-RG88

Бренды по названию

Популярные бренды