Sony MHC-RG88, Руководство по эксплуатации

Страница: 10 / 28

MHC-RG88 E2, E51 4-238-410- 73 (1)
10
GB
To
Play repeatedly
(Repeat Play)
Cancel Repeat
Play
Exchange other CDs
while playing
Remove the CD
*1 All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as a function.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1
Press CD.
2
Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3
Press one of the DISC 1~3 to select a
CD.
To program all the tracks on a CD at once,
proceed to step 5 while “AL” appears on the
display.
Playing the CD (continued)
Do this
Press REPEAT repeatedly to
select “REPEAT”
*1
or
“REPEAT 1” *2 .
Press REPEAT until
“REPEAT”
or “REPEAT 1”
disappears from the display.
Press DISC SKIP
EX-CHANGE.
Press OPEN/CLOSE Z .
4
Press . or > repeatedly until the
track you want appears in the display.
5
Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press hH .
To
Cancel Program Play
Clear a track from
the end
Add a track to the
program when
playback is stopped
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
hH to play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
Track
number
Total playing time
(including selected
track)
PROGRAM
Disc tray
number
Do this
Press PLAY MODE
repeatedly until “1 DISC” or
“ALL DISCS” appears in
the display.
Press CLEAR on the remote
when playback is stopped.
1 Press one of the DISC
1~3 buttons to select a
CD.
2 Press . or >
repeatedly to select the
track.
3 Press ENTER.