54
GB
MHC-M20D.GB.4-736-071-
13
(1)
Disc player
The disc tray does not open and
“LOCKED” appears on the display.
•
•
Consult your nearest Sony dealer
or local authorized Sony service
facility.
The disc tray does not close.
•
•
Load the disc correctly.
The disc does not eject.
•
•
You cannot eject the disc during
Synchronized Transfer or REC1
Transfer. Press
to cancel the
transfer, then press
on the unit
to eject the disc.
•
•
Consult your nearest Sony dealer.
Playback does not start.
•
•
Wipe the disc clean (page 62).
•
•
Reload the disc.
•
•
Load the disc that this system can
play back (page 8).
•
•
Remove the disc and wipe away
the moisture on the disc, then
leave the system turned on for
a few hours until the moisture
evaporates.
•
•
The region code on the DVD VIDEO
does not match the system.
The sound skips.
•
•
Wipe the disc clean (page 62).
•
•
Reload the disc.
•
•
Move the unit to a place with no
vibration.
•
•
Move the speakers away from the
unit. When you listen to a track
with bass sounds at high volume,
the speaker vibration may cause
the sound to skip.
Playback does not start from the
first track.
•
•
Set the play mode to Normal Play
(page 25).
•
•
Resume Play has been selected.
Press
twice. Then, press
to
start playback.
You cannot perform some
functions such as Stop, Lock
Search, Slow-motion Play, Repeat
Play, or Shuffle Play.
•
•
Depending on the disc, you may
not be able to do some of the
operations above. Refer to the
operating instructions supplied
with the disc.
The DATA CD/DATA DVD (MP3,
MPEG4, or Xvid) cannot be played
back.
•
•
The data is not stored in the
supported format.
•
•
Make sure you have selected
the correct Media Mode before
playback.
The folder name, track name, file
name and ID3 tag characters do
not appear properly.
•
•
The ID3 tag is not Version 1 (1.0/1.1)
or Version 2 (2.2/2.3).
•
•
The character codes that can be
displayed by this system are as
follows:
•
—Upper cases (A to Z)
•
—Numbers (0 to 9)
•
—Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.
USB device
Transferring results in an error.
•
•
You are using an unsupported USB
device. Check the information on
the website about compatible USB
devices (page 11).
•
•
The USB device is not formatted
correctly. Refer to the operating
instructions of the USB device on
how to format.
