![background image](http://html.mh-extra.com/html/sony/mhc-gt3d/mhc-gt3d_operating-instructions-manual_1330034056.webp)
56
GB
model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\090INF.fm]
masterpage:Left
The language for the sound track
cannot be changed.
Multilingual tracks are not recorded
on the DVD VIDEO being played back.
The DVD VIDEO prohibits changing
the language for the sound track.
The subtitles language cannot be
changed.
Multilingual subtitles are not
recorded on the DVD VIDEO being
played back.
The DVD VIDEO prohibits changing
the subtitles.
The subtitles cannot be turned off.
The DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.
Multi-angles are not recorded on the
DVD VIDEO being played back.
The DVD VIDEO prohibits changing
the angles.
Tuner
There is severe hum or noise, or
stations cannot be received.
Connect the antenna properly.
Change antenna location and its
orientation to obtain good reception.
Turn off surrounding electrical
equipment.
BLUETOOTH device
Pairing cannot be performed.
Move the BLUETOOTH device closer
to the system.
Pairing may not be possible if other
BLUETOOTH devices are present
around the system. In this case, turn
off the other BLUETOOTH devices.
Make sure the correct passkey was
entered at the BLUETOOTH device.
The BLUETOOTH device cannot
detect the system, or “BT OFF”
appears in the display panel.
Set the BLUETOOTH signal to “BT ON”
(page 43).
Connection is not possible.
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and cannot
be connected with the system.
Enable the BLUETOOTH function of
the BLUETOOTH device.
Establish a connection from the
BLUETOOTH device.
The pairing registration information
has been erased. Perform the pairing
operation again.
Erase the pairing registration
information of the BLUETOOTH
device (page 41) and perform the
pairing operation again (page 40).
The sound skips or fluctuates, or the
connection is lost.
The system and the BLUETOOTH
device are too far apart.
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
Increase the volume on your
BLUETOOTH device first, then adjust
the volume using
+/–.
There is severe hum, noise, or
distorted sound.
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.