model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
2
GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\020REG.fm]
masterpage:Left
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To reduce the risk of fire, do not cover
the ventilation opening of the
appliance with newspapers,
tablecloths, curtains, etc.
Do not expose the appliance to naked
flame sources (for example, lighted
candles).
To reduce the risk of fire or electric
shock, do not expose this appliance to
dripping or splashing, and do not place
objects filled with liquids, such as
vases, on the appliance.
As the main plug is used to disconnect
the unit from the mains, connect the
unit to an easily accessible AC outlet.
Should you notice an abnormality in
the unit, disconnect the main plug
from the AC outlet immediately.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
Do not expose batteries or appliances
with battery-installed to excessive
heat, such as sunshine and fire.
The unit is not disconnected from the
mains as long as it is connected to the
AC outlet, even if the unit itself has
been turned off.
The validity of the CE marking is
restricted to only those countries
where it is legally enforced, mainly in
the countries EEA (European Economic
Area).
This equipment has been tested and
found to comply with the limits set out
in the EMC regulation using a
connection cable shorter than
3 meters.
CAUTION
The use of optical instruments with this
product will increase eye hazard.
This appliance is classified as a CLASS 1
LASER product under IEC 60825-
1:2007. This marking is located on the
rear exterior.
For customers in Europe
This marking is intended to alert the
user to the risk of electric shock to
persons, so be sure do not open the
appliance. This marking is located on
the rear exterior.
WARNING
