
16
GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\050CON.fm]
masterpage:Left
model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
Place the subwoofer at least 10 cm from
the wall to avoid damaging the
protruding AC power cord (mains lead).
Use screws that are suitable for the wall
material and strength. As a plaster
board wall is especially fragile, attach
the screws securely to a wall stud. Install
the speaker system on a vertical and flat
reinforced area of the wall.
Be sure to subcontract the installation to
Sony dealers or licensed contractors and
pay special attention to safety during
the installation.
Sony is not responsible for accidents or
damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
1
Prepare screws (not supplied) that
are suitable for the holes on the
back of the speaker system.
2
Drive the screws to the wall.
The screws should protrude 6 mm
to 7 mm from the wall.
3
Hang the speaker system onto the
screws.
Align the holes on the back of the
speaker system to the screws, then
hang the speaker system onto the
2 screws.
Installing the speaker
system on a wall
Notes
10 cm
4 mm
More than 25 mm
5 mm
Hole on the back of the speaker system
10 mm
800 mm
6 mm to
7 mm