![background image](http://html.mh-extra.com/html/sony/mhc-gnx600/mhc-gnx600_operating-instrction_1330002009.webp)
Disc – Pla
y
bac
k
9
GB
Use buttons on the remote for the operation.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
“CLOCK” appears in the display. Then, the
hour indication flashes in the display.
3
Press –
.
or
>
+
repeatedly to set
the hour.
4
Press ENTER.
The minute indication flashes in the
display.
5
Press –
.
or
>
+ repeatedly to set
the minute.
6
Press ENTER.
The clock starts functioning.
To adjust the clock
1
Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET” flashes in the display.
2
Press –
.
or
>
+ repeatedly to select
“CLOCK SET”, then press ENTER.
The hour indication flashes in the display.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
1
Press
Z
OPEN/CLOSE.
The disc tray slides out.
2
Load a disc with the label side facing
up on the disc tray.
To load additional discs, press
DISC SKIP/EX-CHANGE to rotate the
disc tray.
3
Press
Z
OPEN/CLOSE to close the disc
tray.
Notes
• Do not push the disc tray when closing it as this may
cause malfunction. Press
Z
OPEN/CLOSE
to close
the disc tray.
• Do not use a disc with cellophane tape, seals or paste
on it as this may cause malfunction.
This system lets you play back CDGs*, AUDIO
CDs and discs with MP3 audio tracks in
different play modes.
Before playing a CDG*, turn on your TV and
select the video input.
* MHC-GNX660 only
Setting the clock
Disc – Playback
Loading a disc
Playing a disc
— Normal Play/Shuffle Play
When you
play back a 8
cm disc such
as CD single,
place it on the
inner circle of
the tray
continued