18
GB
You can reinforce the bass and create a more
powerful sound.
Press GROOVE repeatedly.
Each time you press the button, the display
changes cyclically as follows:
GROOVE ON*
t
GROOVE OFF
* The volume switches to power mode and the
equalizer curve changes.
Tips
• The default setting is “GROOVE ON”.
• When “GROOVE ON” is selected,
“GROOVE” lights up in the display.
Press PRESET EQ (or EQ on the remote)
repeatedly to select one of the following
preset effect.
To cancel the preset effect
Press PRESET EQ (or EQ
on the remote)
repeatedly until “FLAT” appears in the display.
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer setting in the memory.
1
Press EQ BAND/MEMORY.
2
Turn and hold
.
OPERATION DIAL
>
clockwise or counterclockwise
and release it when you reach the level
or surround effect you want.
3
Repeat step 1 and 2 to adjust the level
of frequency band “MID”.
4
Repeat step 1 and 2 to adjust the level
of frequency band “HIGH”.
5
Repeat step 1 and 2 to select the
surround effect.
6
Press EQ BAND/MEMORY.
“MEMORY EQ-1” appears in the display.
7
Turn and hold
.
OPERATION DIAL
>
clockwise or counterclockwise
and release it when you reach the user
equalizer number (1~3) you want to
store the equalizer setting.
8
Press EQ BAND/MEMORY.
This setting is automatically stored as the
user equalizer setting you selected in step 7.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
Tip
If you do not want to store the equalizer setting, select
“EXIT” in step 7.
Sound Adjustment
Adjusting the sound
Selecting the preset
effect
Effect
Category
ROCK
POP
JAZZ
DANCE
SOUL
TECHNO
HIP HOP
REGGAE
SAMBA
CLASSICAL
Standard music sources
FLAT
Original music source
USER EQ 1
USER EQ 2
USER EQ 3
User equalizer setting
Adjusting the graphic
equalizer or selecting the
surround effect
GROOVE
A
B
Frequency level
Frequency band