Sony MHC-GN1100D, Руководство по эксплуатации

Страница: 76 / 96

76 GB
The surround effect is difficult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
• Make sure the sound field is set properly
(page 58).
• Check the speaker connections and
settings (pages 16 and 50).
• Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo effect when
you play back an AUDIO CD, VIDEO
CD, MP3 audio track, DivX video file
or DVD VIDEO.
• Unplug the microphone or press
KARAOKE MODE repeatedly until
“
m ” disappears from the display.
• Make sure the system is connected
properly.
Picture
There is no picture.
• Press FU/– repeatedly to
select “DVD” (or press DVD on the
unit).
• Check that the system is connected
securely.
• The video cord is damaged. Replace it
with a new one.
• Make sure you connect the unit to the
video input jack of your TV (page 19).
• Make sure you turn on the TV and
operate the TV correctly.
• Press PROGRESSIVE on the unit
repeatedly to select “INTERLACE” if
you connect your TV to the unit’s
COMPONENT VIDEO OUT jacks and
your TV cannot accept progressive
signal.
• You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, set to
interlace format (the default setting)
(page 20).
• Even if your TV is compatible with
progressive format (525p/625p) signals,
the image may be affected when you set
to progressive format. In this case, set to
interlace format (the default setting)
(page 20).
• Make sure you select the video input on
the TV so that you can view the pictures
from the system.
• Make sure you set the color system
correctly, according to your TV’s color
system.
Picture noise appears.
• Clean the disc.
• If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems after checking your
connections, connect your unit directly
to your TV’s S Video input (page 19).
• Keep the speaker cords away from the
antennas.
• When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system, the
picture image may be distorted
(page 19, 48).