Sony MEX-BT4000U, Руководство по эксплуатации

Страница: 41 / 244

41
The phonebook data stored in this unit does
not appear.

The other Bluetooth device is connected to this
unit via the Bluetooth function.
– Connect a cellular phone whose phonebook
data has been transferred to this unit
(page 24).
Error displays/Messages
BT BUSY (Bluetooth Busy)

The phonebook and the call history of the
cellular phone are not accessible from this unit.
– Wait for a while, and then try again.
CHECKING

The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
DEVICE FULL

There are 5 devices already stored in the
internal phonebook.
– Delete one of them, then try to add the other
cellular phone’s data (page 26).
EMPTY

The call history is empty.

The phonebook is empty.
ERROR

The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.

A blank disc has been inserted.

The disc cannot play due to a problem.
– Insert another disc.

USB device was not automatically recognized.
– Reconnect it again.

Press

to remove the disc.

BT Initialize failed.

Phonebook access failed.

Phonebook content was changed while
accessing the cellular phone.
– Access the phonebook in the cellular phone
again.
FAILURE

The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)

USB hub is not supported on this unit.
MEM FAILURE (Memory Failure)

This unit failed to store the contact in the
preset dial.
– Make sure that the number you intend to
store is correct (page 26).
MEMORY BUSY

This unit is storing data.
– Wait until storing has finished.
MEMORY FULL

1,000 contacts have been stored.
– The internal phonebook can store a
maximum of 1,000 contacts.
NO AF (No Alternative Frequencies)

There is no alternative frequency for the
current station.
– Press

+/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(Program Identification) data (“PI SEEK”
appears).
NO DEV (No Device)

USB is selected as source without a USB device
connected. A USB device or a USB cable has
been disconnected during playback.
– Be sure to connect a USB device and USB
cable.

Bluetooth audio source is selected without a
Bluetooth audio device connected. A
Bluetooth audio device has been disconnected
during a call.
– Be sure to connect a Bluetooth audio device.

Bluetooth phone source is selected without a
cellular phone connected. A cellular phone has
been disconnected during a call.
– Be sure to connect a cellular phone.
NO INFO (No Information)

Network name and cellular phone name are
not received with cellular phone connected.
NO MUSIC

The disc or USB device does not contain a
music file.