Sony MEX-BT4000U, Руководство по эксплуатации

Страница: 31 / 244

31
You can also set the approximate subwoofer
position from your listening position if:
– the audio output is set to “SUB-OUT”
(page 32).
– the listening position is set to other than
“OFF.”
The options for “SET SW POS” are
indicated below.
NEAR (

): Near
NORMAL (

): Normal
FAR
(

): Far
1
During reception/playback, press the
select button.
2
Rotate the control dial until “SET
POSITION” appears, then press it.
3
Rotate the control dial to select from
“FRONT L,” “FRONT R,” “FRONT” or
“ALL,” then press it.
4
Rotate the control dial until “SET SW
POS” appears, then press it.
5
Rotate the control dial to select the
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.
6
Press (BACK).
To cancel the listening position, select
“OFF” in step 3.
Adjusting the listening
position
You can fine-tune the listening position
setting.
1
During reception/playback, press the
select button.
2
Rotate the control dial until “ADJ
POSITION” appears, then press it.
3
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”
4
Press (BACK).
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
1
During playback, press the select
button.
2
Rotate the control dial until “DM+”
appears, then press it.
3
Rotate the control dial to select “ON,”
then press it.
4
Press (BACK).
Tip
The DM+ setting can be memorized for each
source.
Using rear speakers as a
subwoofer — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass
sound by applying a low pass filter setting
(page 33) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1
During reception/playback, press the
select button.
2
Rotate the control dial until “RB ENH”
appears, then press it.
3
Rotate the control dial to select from
“1,” “2” or “3,” then press it.
4
Press (BACK).