Sony MEX-BT4000U, Руководство по эксплуатации

Страница: 32 / 244

32
Adjusting setup items
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
*
The setting is complete.
4
Press (BACK).
* For CLOCK-ADJ and BTM settings, step 4 is
not necessary. And for BT SIGNL and
PAIRING settings, step 3 and 4 are not
necessary.
The following items can be set depending
on the source and setting:
CLOCK-ADJ (Clock Adjust) (page 7)
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 13).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM (Caution Alarm)*
1
Activates the caution alarm: “ON,”
“OFF” (page 7).
AUX-A (AUX Audio)* 1
Activates the AUX source display: “ON,”
“OFF” (page 33).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
REAR/SUB * 1
Switches the audio output: “REAR-
OUT” (power amplifier), “SUB-OUT”
(subwoofer).
DEMO (Demonstration)
Activates the demonstration: “ON,”
“OFF.”
DIMMER
Changes the display brightness.
– “AT”: to dim the display automatically
when you turn lights on. (Available only
when the illumination control lead is
connected.)
– “ON”: to dim the display.
– “OFF”: deactivate the dimmer.
COLOR (Preset Color)
Selects the preset color of the display and
buttons on the main unit (page 18).
CUSTOM-C (Custom Color)
Selects a preset color as a basis for
further customizing (page 19).
SND SYNC (Sound Synchronization)
Selects the color with sound
synchronization: “ON,” “OFF.”
WHT MENU (White Menu)
Sets the effect when the source is
switched: “ON,” “OFF.”
START-WHT (Start White)
Sets the start up color: “ON,” “OFF.”
AUTO SCR (Auto Scroll)
Scrolls long items automatically: “ON,”
“OFF.”
REGIONAL *
2
Restricts reception to a specific region:
“ON,” “OFF” (page 12).
ZAP TIME (Zappin Time)
Selects the playback time for the
ZAPPIN function.
– “Z.TIME-1 (about 6 seconds),”
“Z.TIME-2 (about 15 seconds),”
“Z.TIME-3 (about 30 seconds).”
ZAP BEEP (Zappin Beep)
Applies a beep sound between track
passages: “ON,” “OFF.”