4
MDX-M690
SECTION 1
SERVICING NOTES
PRECAUTION ON OPEN/CLOSE FRONT PANEL
The front panel opens to the bottom of main unit.
In performing the repair, place the main unit on the base having
the height exceeding 1 cm.
Open the front panel by supplying the power through the follow-
ing steps:
1. Disconnect the motor connector (CN602) from main board.
2. Supply the power to the motor.
Voltage
: 9 V
Yellow wiring : MOTOR –
Black wiring : MOTOR +
front panel
MDX-M690
( SIDE VIEW)
1cm
base
black wiring
yellow wiring
connector
(CN602)
–
+
DETACHING THE DISPLAY PANEL IN THE TEST MODE
In the normal mode, after pressing the
[OPEN]
key for two sec-
onds to set the front panel in detaching position and detaching the
display panel is complete, the front panel closes automatically.
But in the test mode, the front panel opens automatically. (refer to
page 20 for test mode)
Содержание MDX-M690
Страница 79: ...79 MDX M690 MEMO ...