Sony MDS-JE780, Руководство по эксплуатации

Страница: 31 / 56

Edit
ing R
e
cor
d
ed
MD
s
31
GB
You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2.
1
While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./>
repeatedly) until “Move?” appears, then
press AMS or YES.
3
Turn AMS (or press ./>
repeatedly) until the number of the track
to be moved appears, then press AMS
or YES.
4
Turn AMS (or press ./>
repeatedly) until the new track position
appears, then press AMS or YES.
“Complete!” appears and the deck starts to
play the moved track.
Note
When you move a track to a track number that is
registered into a group, the moved track is re-
registered into the group containing the move
destination track number. In addition, if you move a
track that is registered into a group to a track number
that is not registered into a group, the group
registration of the moved track is released. However,
when the Group function is on, you can only move
tracks within the selected group.
You can enter a name for a recorded MD as well
as for individual tracks. Names can consist of
uppercase and lowercase letters, numbers, and
symbols. A total number of about
1,700 characters can be stored for all the names
on the MD.
The following procedure is for entering names
when the Group function is off. To name a
group, see “Naming a group” on page 34.
However, when naming an MD recorded
using the Group function, be sure to name
the disc with the Group function on so as
not to rewrite the group management
information by mistake.
For details on the group management
information, see page 11.
Notes
•
If you name a track while it is being recorded, be
sure to finish the naming operation before the track
ends. If the track ends before you finish, the entered
character data will be discarded and the track will
remain unnamed.
• If you enter the symbol “//” between the characters
in disc names such as “abc//def”, you may be unable
to use the Group function.
Moving recorded tracks
— Move Function
1 2 3
1
2 3
4
4
A
A C B D
B C D
Track
number
Original
tracks
After
MOVE
Naming a track or an MD
— Name Function
continued