Sony MDS-JE780 Скачать руководство пользователя | Manualshive

Страница: 51 / 56

background image

Ad
di

tiona

l Inf

o

rm
ation

51

GB

Incomplete!

The S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) operation was not
performed properly because the deck was moved
while recording was in progress or the MD is
damaged or dirty.

Initialize (flashing)

The Setup Menu settings have been lost.
Or the contents recorded by the timer have
disappeared over time and are not be available for
saving to disc, or Programme Play could not be
activated since the programme has disappeared
over time.
(The message flashes for about four seconds when
you turn on the deck by pressing

?/1

.)

Name Full!

The naming capacity of the MD has reached its
limit (about 1,700 characters).

Net MD

The Net MD function is on. (If you attempt an
invalid operation at this time, “Net MD!” appears.)

Net MD NOW

You pressed the

?/1

during Check In or Check Out

execution. This may cause data damage, so be sure
to wait for Check In or Check Out to finish before
turning off the Net MD function and the MD deck.

No Change

While attempting to change the recording level
after recording, you pressed AMS or YES without
actually changing the recording level, so no change
was made.

No Disc

There is no MD in the deck.

No Name

The track or disc has no name.

Premastered

An attempt was made to record or edit to a
premastered MD.

Push Stop!

You pressed an invalid key during MD operation.
Press

x

and perform the operation again.

S.F Edit!

You attempted to perform another operation while
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
You cannot perform any other operations while in
S.F Edit mode.

(S.F) Edit NOW

You pressed

?/1

while in S.F Edit (changing the

recording level after recording, Fade-in, Fade-out)
mode.
If you turn off the deck while in S.F Edit mode, any
changes that you have made will not be made
properly. Finish the changes and leave S.F Edit
mode before turning off the deck. If you
accidentally turn off the deck while changes are
being made, press

?/1

while the message is

displayed.

Smart Space

The Smart Space Function is on (page 15).

Step Full!

The programme contains the maximum number of
tracks. You cannot add any more tracks.

TOC Reading

The deck is checking the TOC (Table Of Contents)
on the MD.

TrProtected

You cannot perform editing operations on protected
tracks (tracks checked out from a USB connected
computer, etc.) other than “Moving recorded
tracks” on page 31 and “Naming a track or an MD”
on page 31 using this deck.

«
...
49
50
51
52
53
...
»

Содержание MDS-JE780

























































Отзывы:

Нет отзывов

Похожие инструкции для MDS-JE780

Бренд: Hama Страницы: 12

Бренд: Teac Страницы: 2

Бренд: Tascam Страницы: 68

Бренд: Yamaha Страницы: 90

DVD P191 - MULTI REGION CODE FREE DVD PLAYER. THIS PLAYER PLAYS...

Бренд: Samsung Страницы: 140

EC Living RENA SA-1

Бренд: ELECTROCOMPANIET Страницы: 16

Бренд: Cerwin-Vega Страницы: 12

Бренд: DANE-ELEC Страницы: 20

AZ7275 - Cd Personal

Бренд: Magnavox Страницы: 18

Бренд: iBasso Страницы: 16

Бренд: Majestic Страницы: 28

Бренд: Aiwa Страницы: 2

Бренд: Roadstar Страницы: 45

Бренд: Saab Страницы: 20

Бренд: TBM Страницы: 10

Бренд: Cambridge Audio Страницы: 29

Бренд: Xtatix Страницы: 8

Бренд: Panasonic Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды