Sony MDS-JE780 Скачать руководство пользователя

Страница: 23 / 56

Pla

ing M

This function allows you to listen only to your
favorite tracks which you have registered into a
group.

Do steps 1 to 3 of “Playing an MD” on
page 20.

Press GROUP ON/OFF.

The GROUP ON/OFF button lights up. The
disc name and the total number of groups
appears.

Press PLAY MODE repeatedly until the
mode you want appears.

Press GROUP SKIP repeatedly until the
group you want to play appears.

Press

Adjust the volume on the amplifier.

The deck stops when playback of the last
track in the group ends.

Tip

You can perform the operations described under
Repeat Play (page 20), Other Operations (page 21)
and Programme Play (page 24) only for the tracks in
the group.

Note

If you select and play a group that does not have any
tracks registered, play starts from the first track of the
first group on the MD.

Notes when using a remote (RM-TP501,
RM-TP502, RM-TP503, RM-TP504) supplied
with a Sony amplifier or tuner

•

When the Group function is on, if you select and
play a track using any of the above remotes, the
Group function automatically turns off.

•

When the Group function is on, the remote display
for the track number being played may differ from
the deck display.

Playing only the tracks in
the desired group

Select

To play

Blank (no PLAY
MODE indication)

The tracks in the group in
the original order.

SHUF

The tracks in the group in
random order.

PGM

The tracks in the group in
the order you want (see
“Creating your own
programme” on page 24).

Содержание MDS-JE780

























































Результаты поиска

Содержание MDS-JE780

Отзывы:

Похожие инструкции для MDS-JE780

Бренды по названию

Популярные бренды

Sony MDS-JE780, Руководство по эксплуатации

Результаты поиска

Содержание MDS-JE780

Отзывы:

Похожие инструкции для MDS-JE780

Бренды по названию

Популярные бренды