manualshive.com logo in svg

Sony MDS-JA333ES - Md Player, Руководство по обслуживанию

Поделиться
Скачать
Sony MDS-JA333ES - Md Player Скачать руководство пользователя страница 22

22

SECTION  4

TEST MODE

4-1. Precaution on Using the Test Mode

•

Be sure to insert and eject a disc after confirming that the disc in the MDS-JA333ES has come to complete stop because the loading
related movements of the mechanism are performed without any relationship with the test mode.
Disc does not stop rotating even through the  

A 

 button is pressed while disc is rotating in the modes such as continuous playback and

continuous recording.  Therefore, the disc is ejected while it is rotating.
Be sure to press the  MENU/NO  button, then press the  

A 

 button after a disc has completely stopped of its rotation.

4-1-1. Modes in Which Recording Laser Emits the Light and the Button Operations

•

Continuos recording mode (CREC 1MODE)

•

Laser power check mode (LDPWR CHECK)

•

Laser power adjustment mode (LDPWR ADJUS)

•

IOP check (IOP compare) (Not used with the MDM-6J and MBU-5J)

•

IOP value non-volatile writing (IOP NV Save) (Not used with the MDM-6J and MBU-5J)

•

Traverse (MO) check (EF MO CHECK)

•

Traverse (MO) check (EF MO ADJUS)

•

When the  

z

REC  button is pressed

4-2. How to Enter the Test Mode

There are two methods to enter the test mode as follows.
Method 1: Connect the power plug to the outlet while pressing the 

 l

AMS

L

  knob and  

x 

 button at the same time, and remove the

l

AMS

L

  knob and  

x 

 button at the same time.

When the unit enters the test mode, “[Check]” appears. The three groups can be switched, ......

↔

 [Check] 

↔ 

[Service] 

↔

[Develop] 

↔..... 

, by rotating the 

 l

AMS

L

  knob.

The Develop group is not used for service. If you enter the group mistakenly, immediately press the MENU/NO button and exit
the mode.

Method 2: Connect the power plug to the outlet while pressing the 

 l

AMS

L

  knob, and remove the 

 l

AMS

L

  knob.

When the unit enters the test mode, “TEMP CHECK” (C12) appears. When the test mode is entered using this method, the
contents of check group at method 1 can be performed.

4-3. Exiting the Test Mode

Press the  REPEAT  button.  The MDS-JA333ES enters the standby status and exits the test mode.

4-4. Basic Operation of the Test Mode

All operations are performed using the 

 l

AMS

L

  knob,  YES  button, and  MENU/NO  button.

The functions of these button are as follows.

Function name

Function

MENU/NO button

Chancels or moves to the upper hierarchy

YES button

Decision

l

AMS

L

  knob (right/left) Selection

l

AMS

L

  knob (pushed)

Decides the sub-menu

Содержание MDS-JA333ES - Md Player
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды