58
Press
+
when inputting alphabet,
symbol or numbers to change the letter
to the one before/next one. Press
=
to go back.
Press DISPLAY to insert a blank space
to type in a new letter.
Press MODE to delete a letter and
move back all following letters to the
left.
Press
p
or T MARK to cancel labeling.
5
Repeat step 4 and enter all characters
of the label name.
6
Press EDIT/ENTER.
The track or disc is labeled.
Labeling a track during playback
1
Insert a disc and play the track you
want to label.
2
Press EDIT/ENTER.
”
: Name” flashes in the display.
3
Press EDIT/ENTER again.
4
Follow steps 4 to 6 of ”Labeling a disc
during stop” above.
Labeling a track or a disc during
recording
1
Press EDIT/ENTER during recording.
”
: Name” flashes in the display.
2
To label a track, press EDIT/ENTER
again.
To label a disc, press
=
or
+
repeatedly until ”
: Name” flashes
in the display, then press EDIT/
ENTER.
3
Follow steps 4 to 6 of ”Labeling a disc
during stop” above.
When the recording is stopped while
labeling a track or a disc during recording,
or when the playback moves on to the next
track while labeling a track during
playback, the input at that point is entered
automatically.
Labeling on the remote control
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press
p
to stop.
2
Press DISPLAY for 2 seconds or
longer.
”
: Name” flashes in the display.
3
Press
p
.
The disc is ready to be labeled.
4
Turn the control to select a letter and
press
p
to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press
p
to switch between katakana,
the alphabet, and symbols/numbers.
Press /– to move the
cursor to left or right.
Turn the control to
(
•
+
when
inputting alphabet, symbol or numbers
to change the letter to the one before/
next one. Turn to
=
to go back.
Press DISPLAY to insert a blank space
to type in a new letter.
Press PLAY MODE to delete a letter
and move back all following letters to
the left.
Press TRACK MARK to cancel
labeling.
5
Repeat step 4 and enter all characters
of the label name.
6
Keep pressing
p
for 2 seconds or
longer.
The track or disc is labeled.
Labeling a track during playback
1
Insert a disc and play the track you
want to label.
2
Press DISPLAY for 2 seconds or
longer..
”
: Name” flashes in the display.
3
Press
p
.
The disc is ready to be labeled.
4
Follow steps 4 to 6 of ”Labeling a disc
during stop” above.enter the selected
character.
