56
Erasing a whole disc
See the illustration in the Japanese text
(page 24).
You can erase all the tracks on a disc at a
time. Note that once a recording has been
erased, you cannot retrieve it.
1
Press EDIT/ENTER on the recorder.
2
Press
=
or
+
repeatedly until
”
: Erase” flashes in the display.
3
Press EDIT/ENTER again.
”All Erase?” and ”Push ENTER”
appear alternately in the display.
To cancel erasing, press
p
or T MARK.
4
Press EDIT/ENTER again.
”Toc Edit” flashes in the display, and
all the tracks will be erased.
When erasing is complete, ”BLANK
DISC” appears in the display.
Adding a track mark
See the illustration in the Japanese text
(page 25).
You can insert a track mark into a track.
1
While the recorder is playing or
pausing an MD, press T MARK on the
recorder at the point you want to
mark.
"MARK ON" appears in the display,
and the track mark is added.
To add track marks while recording.
Press T MARK while recording (except while
Synchro-recording).
z
Editing recorded tracks
You can edit your recordings.
Premastered MDs cannot be edited.
Notes
•
When you press
p
after editing, "Toc Edit"
flashes for about a second. Do not move or
jog the recorder or disconnect the power
source while the indication is flashing.
•
You cannot edit on an MD with its tab open
for protection. Before editing, close the tab at
the side of the MD.
Erasing a track
See the illustration in the Japanese text
(page 24).
You can quickly erase a recorded track.
Note that once a recording has been erased,
you cannot retrieve it.
1
Press EDIT/ENTER while playing the
track you want to erase.
”
: Name” flashes in the display,
and the recorder plays the selected
track repeatedly.
2
Press
=
or
+
repeatedly until
”
: Erase” flashes in the display.
3
Press EDIT/ENTER again.
”Erase OK?” and ”Push ENTER”
appear alternately in the display.
To cancel erasing, press
p
or T MARK.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.
