Sony Mavica MVC-FD83 Скачать руководство пользователя страница 7

Страница: 7 / 113

– 7 –

[Description on Self-diagnosis Display]

Note :

The “Self-diagnosis” data is backed up by the coin
lithiumbattery. The data will be lost and initialized when
the coin lithium battery is removed.

Display Code

C:32:01

C:13:01

E:91:01

Countermeasure

Change the disk and turn off the main
power then back on.

Replace the floppy disk.
Format the floppy disk with the MVC-
FD83/FD88.

Cause

Defective floppy disk.

• The type of floppy disk that cannot be

used by this machine, is inserted.
(Such as 2DD)

• Data is damaged.
• Unformatted disk is inserted.

Abnormality when flash is being
charged.

Caution Display During Error

DRIVE ERROR

DISK ERROR

Flash LED
Flash display
Flashing at 3.2 Hz

—

Note :

The error code is cleared if the battery is removed, except defective flash.

*1 : The error display is given in two ways.
*2 : When the flash charging failed, Page:D, Address:C7, Data:04 are written.

After repair, be sure to write Page:D, Address:C7, Data:00.

[Power supplying Method]

Use the AC power adaptor (BC-V615) when supplying the power to this set.

C:63:00
E:61:00

C:63:10
E:61:10

Repair by service engineers only.

When failed in the focus initialization.

When failed in the zoom initialization.

Содержание Mavica MVC-FD83


















































































































Результаты поиска

Содержание Mavica MVC-FD83

Отзывы:

Sony Mavica MVC-FD83, Руководство по обслуживанию, Страница: 7 / 113

Результаты поиска

Содержание Mavica MVC-FD83

Отзывы: