28
Initial Setup menu
The Initial Setup menu is used to make the basic
settings to use the unit.
Custom Button
Assigns the function to the CUSTOM 1,
CUSTOM 2 or CUSTOM 3 button on the
front panel, and can set the following
functions to on or off.
No Setting
Scan Size
Flip Pattern
POP Sub Screen Position
Gamma
Mono
Phase
Chroma
Brightness
Contrast
Panel Display
Backlight
Adjusts the brightness of the display. A
higher setting increases the brightness
of the display, and a lower setting
darkens the display.
I/P Mode
Set to minimize delay due to image
processing in the monitor when it is
mainly the interlace signal being input
to the DVI or SDI connector.
Mode1:
Prioritizes picture quality. An
interpolation is performed between
the fields depending on the
movement of the images.
Image processing time will be
longer than when set in “Mode2” or
“Mode3.”
Mode2
1)
:
Shortens image processing time.
The lines in the odd fields and even
fields are combined alternately
regardless of the movement of the
images.
Mode3
1)
2)
:
Minimizes image processing time.
An interpolation is performed by
repeating each line in the data
receiving sequence once,
regardless of the field.
1) When an interlace signal is being
input, jitter, flicker, or image lag may
occur in the images.
2) When used with other devices, such
as electrosurgical knife, image
irregularity or distortion may occur
and/or the monitor may fail to
operate correctly.
Monitor Information
Software Version
Displays the software version.
Submenu
Setting
Submenu
Setting
Language
You can select the menu or message
language from the following
languages.
English: English
: Japanese
Italiano: Italian
: Spanish
Deutsch: German
: French
Русский: Russian
Port A Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to “Not Skip” or “Skip” for the
Display Port 1, Display Port 2, HDMI,
DVI-D, SDI (LMD-X2705N only)
connector.
Port B Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT B button.
Set to “Not Skip” or “Skip” for the
Display Port 1, Display Port 2, HDMI,
DVI-D, SDI (LMD-X2705N only)
connector.
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel while using multi-image
display.
Set to “Not Skip” or “Skip” for the PIP1,
PIP2, POP1, or POP2 pattern.
PIP / POP
PIP Sub Screen
Position
Sets the sub screen position for the
multi-image display (PIP).
POP Sub Screen
Position
Sets the sub screen position for the
multi-image display (POP).
PORT A HD
Clipping Size/
PORT B HD
Clipping Size
Select the clipping size of the HD
signal from “Normal,” “4:3,” “5:4” when
displaying the multi-image display.
Custom Button
Assigns the function to the CUSTOM 1,
CUSTOM 2 or CUSTOM 3 button on the
front panel, and can set the following
functions to on or off.
No Setting
Scan Size
Flip Pattern
POP Sub Screen Position
Gamma
Mono
Phase
Chroma
Brightness
Contrast
Содержание LMD-X2700N
Страница 38: ......