21
To unplug the AC power cord
Press the
(On)/ (Standby) switch to the
(Standby) side to set the unit to the standby
state, then unplug the AC power cord from the
AC power plug holder by holding both sides of
the fixing levers of the holder to release the lock.
When the optional AC adaptor is used, set the
unit to the standby state, then unplug the AC
power cord from the AC adaptor before
disconnecting the DC connector from the unit.
Turning on the Monitor/Switching Input
Settings
1
Press the
(On)/ (Standby) switch to the
(On) side to turn on the monitor.
The power indicator on the front panel lights
in green.
2
Switch the input settings.
If the desired image is not displayed, press
the CONTROL button to show the operation
buttons on the front panel, then press
PORT A or
PORT B.
For details on switching the input settings, refer
to “Location and Function of Parts and Controls”
on page 16 or “Input/Output Configuration
menu” on page 25.
Initial Setting
When you turn on the unit for the first time after
purchasing it, select the area and language
where you intend to use this unit from among
the options.
The initial setting may differ according to the
model you use.
The initial setting may be completed in
advance. In this case, the screens for the Area
Selection and the Language Setting will not be
displayed.
To set the using area
1
Turn on the unit.
The Area Setting screen appears.
2
Press the CONTROL button.
3
Press the
or
button to select the area
where you intend to use the unit and press
the
button.
4
When the confirmation screen is displayed,
press the
or
button to select Yes and
press the CONTROL button.
The Area Setting screen disappears and the
Language Setting screen appears.
The following item in the menu is
automatically applied to the value
corresponding to the selected area.
Area
Color Temperature
World Wide (Except Japan)
D65
Japan
D93
Содержание LMD-X2700N
Страница 38: ......