18
Recording from the
radio
You can record a radio program on a tape by
tuning in a preset station. You can use TYPE I
(normal) or TYPE II (CrO
2
) tapes. The
recording level is automatically adjusted.
4
5
7
6
1
2
3
DSP
DOLBY NR
p
ª
With the side you want to
record on facing forward
1
/
u
(Power)
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
2
Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
3
Press /– to tune in the
desired preset station.
4
Press PUSH
6
and insert a blank
tape into deck B.
5
Press
r
REC.
Deck B stands by for recording, and the
indicator on the
·
button (for the front
side) lights up green.
6
Press DIRECTION repeatedly until
A
appears to record on one side or
ß
(or RELAY) to record on both
sides.
7
Press
P
.
Recording starts.
To stop recording
Press
p
on deck B.
Tips
• When you want to record on the reverse side,
press
ª
after pressing
r
REC in step 5 so the
indicator on the
ª
button (for the reverse side)
lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select “MANUAL”
in step 2, then press /– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so “DOLBY NR B” appears in the
display.
• To record with the surround effect, press DSP so
“SUR
” appears in the display.
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
Frequency
Preset number