62
Specifications (continued)
Tape player section
Recording system
4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
40 – 13,000 Hz ( ±3 dB),
using a Sony TYPE I
cassette
40 – 14,000 Hz ( ±3 dB),
using a Sony TYPE II
cassette
Wow and flutter
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
(100 kHz step)
Antenna
FM wire antenna
Antenna terminals
75 ohm unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Middle Eastern model:
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models:
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
Antenna
AM loop antenna,
External antenna
terminals
Intermediate frequency
450 kHz
Speakers
Front speaker:
Speaker system
4-way, 4-unit, bass-reflex
type, magnetically
shielded type
Speaker units
Super Woofer:
20 cm dia., cone type
Woofer:
20 cm dia., cone type
Low Tweeter:
6 cm dia., cone type
High Tweeter:
6 cm dia., cone type
Rated impedance:
6 ohms
Dimensions (w/h/d)
Approx. 290
×
595
×
445
mm
Mass
Approx. 16 kg net per
speaker
Center speaker:
Speaker system
Full-range, bass-reflex
type, magnetically
shielded type
Speaker units
Full range
10 cm dia., cone type
Rated impedance
8 ohms
Dimensions (w/h/d)
Approx. 360
×
130
×
170
mm
Mass
Approx. 2 kg
Rear speaker:
Speaker system
Full-range, bass-reflex
type
Speaker units
Full range
10 cm dia., cone type
Rated impedance
8 ohms
Dimensions (w/h/d)
Approx. 180
×
130
×
170
mm
Mass
Approx. 1.5 kg net per
speaker
General
Power requirements
Thai model:
220 V AC , 50/60 Hz
Other models:
120 V, 220 V, or 230 –
240 V AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
280 watts
Dimensions (w/h/d)
Approx. 356
×
423
×
446
mm incl. projecting parts
and controls
Mass
Approx. 15.0 kg
Supplied accessories
AM loop antenna (1)
Remote RM-SV100AVB
(1)
R6 (size AA) batteries (2)
FM wire antenna (1)
Speaker cords (2)
Video connecting cable
(1)
Design and specifications are subject to change
without notice.