Sony LBT-G2500 - Lbt Electronics, Руководство по эксплуатации

Страница: 33 / 36

33
Specifications
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from
70 – 20,000 Hz; rated 60 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
North American model
Continuous RMS power output
70 watts + 70 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonic distortion
less than 0.09%
(6 ohms at 1 kHz,
30 watts)
European model
DIN power output (Rated)
60 watts + 60 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
70 watts + 70 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (Reference)
120 watts + 120 watts
(6 ohms at 1 kHz,
10% THD)
Other models
The following measured at AC 110, 220 V 60 Hz;
DIN power output (Rated)
45 watts + 45 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
55 watts + 55 watts
(6 ohms at 1 kHz,
10% THD)
The following measured at AC 120, 240 V 60 Hz;
DIN power output (Rated)
50 watts + 50 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
60 watts + 60 watts
(6 ohms at 1 kHz,
10% THD)
Peak music power output (Reference)
800 watts
Inputs
PHONO IN (phono jacks):
sensitivity 3 mV,
impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of
8 ohms or more
SPEAKER: accepts impedance of 6 to
16 ohms
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(
λ
= 780 nm)
Emission duration:
continuous
Laser output Max. 44.6
µ
W*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Wavelength 780 – 790 nm
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response 60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF) using a Sony TYPE I
cassette
Wow and flutter ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
continued