Sony KV-28DS65U, Руководство по обслуживанию

Страница: 28 / 113

28
White balance adjustment
1. Input an all-white signal.
2. Enter into the Service Mode by pressing ‘TEST’, ‘TEST’
and ‘MENU’ ‘MENU’on the Service Commander.
3. Move the OK button down until ‘MCP CXA2101’is selected
then move the OK button to the right.The ‘MCP CXA2101’
menu will appear on the screen.
4. Select ‘19 R DRIVE’ by moving the OK button down until
‘19 R DRIVE’ is selected then move the OK button to the
right and adjust to 41 by pushing the OK button up or down.
5. Press the OK button to write the data.
6. Adjust the ‘21 G DRIVE’ and ‘23 B DRIVE’ so that the
white
balance becomes optimum.
7. Press the OK button to write the data.
8. Input a 5 - 10 NIT all-white signal.
9. Select ‘25 R CUT-OFF’ by moving the OK button down
until ‘25 R CUT-OFF’ is selected then move the OK button
to the right and adjust to 41 by pushing the OK button up or
down.
10. Adjust the ‘27 G CUT-OFF’, and ‘29 B CUT-OFF’ so that
the white balancebecomes optimum.
11. Press the OK button to write the data.
Item
No
Adjustment menu Data Amount
1 RED ON
2 GREEN ON
3 BLUE ON
4 CBLK OFF
5 AKB T OFF
6 BLK SW OFF
7 DA TEST OFF
8 HY SW 0
9 PICTURE 57
10 LIMIT LEVEL 1
11 HUE 31
12 SYSTEM 1
13 COLOR 31
14 AGE WHT OFF
15 AGE BLK OFF
16 BRIGHT 31
17 YS/YM SW 0
18 YM/VM 0
19 SHARPNESS 35
20 D COL 0
21 G DRIVE ADJ
22 CLP SW 1
23 B DRIVE ADJ
24 CLP MSK 0
25 R CUT OFF 32
26 ABL MODE 2
27 G CUT OFF ADJ
28 ABL TH 1
29 B CUT OFF ADJ
30 SUB BRT ADJ
31 H SEP SEL 1
32 FIX SEL 0
33 V - TC 2
34 H WIDTH 0
35 HD TC 1
36 HS MASK 1
37 CB OFF SET 1 7
38 CR OFF SET 1 7
39 CB OFF SET 2 7
40 CR OFF SET 2 7