Sony KP-ER43M31, Руководство по обслуживанию

Страница: 46 / 225

– 46 –
KP-ER43M31/M61/M90/M91, ER53M31/M61/M90/M91
RM-961
11.DRC1250 WIDE 60 Hz (NTSC) Mode
1) Enter the NTSC monoscope signal and set the DRC1250.
2) Press “MENU” button on the commander and move “ ”
up or down to enter the “FEATURE”
b
“WIDE MODE”.
3) Select “WIDE MODE : ON”, and push “ (ENTER)” but-
ton.
4) Press “MENU” button to return to service mode screen.
5) Set in the service mode and write the following data to
NVM.
Condition :
Category Item Data
GEO 0B AGL 07
0C BOW 07
14 VAS 2C
15 VSC 22
16 USC 01
17 VBW 03
3) Adjust the main deflection. (Refer to 5-5-2.)
12.PIP WIDE 60 Hz (NTSC) Mode
1) Enter the NTSC monoscope signal and set in the service
mode.
2) Set the WIDE mode and open the remote control cover, press
“ (PIP)” button on the commander to set the PIP mode.
3) Confirm and write the following data.
Condition :
Category Item Data
GEO 00 VSZ
01 VPS
02 VLN
03 SCO
04 HSZ
05 HPS
07 PAP
08 UPN
09 LPN
0A TRZ
0B AGL 07
0C BOW 07
14 VAS 2C
15 VSC 22
17 VBW 03
4) Press “ (MUTE)”+“
-
” buttons on the commander to
write the data to the NVM.
Note : Incase of replacing CRTs, adjust the set-up adjustments
(items 3-1 to 3-7) and the registration adjustment
(item 5-5).
In case of replacing two or three CRTs at the same time,
replace and adjust one by one.
4) After the Main Deflection Adjustment finished, press “
(MUTE)”+“ - ” buttons on the commander to write the data
to the NVM.
5) Adjust the sub deflection (Projector Engine Adjustment).
(Refer to 6-5-3.)
6) After the Projector Engine Adjustment finished, press “
(MUTE)”+“
-
” buttons on the commander to write the data
to the NVM.
SPEC
Input Signal H SIZE
NTSC monoscope 15.7 ± 0.1 sq.
Same as
DRC1250
WIDE 60 Hz
(NTSC) mode
V2
V1
V1 – V2 =
±
0.1 sq.