background image

– 44 –

KP-48V75/53V75/61V75

RM-Y903

RM-Y903

RM-Y903

GREEN HORIZONTAL QUATERNARY ADJUSTMENT

1. Correct the quaternary distortion with GH 4PIN.
2. While balancing, correct the quaternary distortion of both

end sections of the screen with GH 4SBOW.

3. While tracking, adjust with GH 4PIN and RGH 4SBOW.

4 PIN

4SBO

4SBOW

GREEN HORIZONTAL ASYMMETRICAL PIN
DISTORTION ADJUSTMENT

1. Adjust with GH MBOW so that the pin asymmetry at both

sides of the center section of screen is symmetrical.

2. Adjust with GH SBOW so that the bow at both end sections

of the screen is symmetrical left and right.

3. While tracking, adjust with GH MBOW and GH SBOW so

that the bow of vertical lines on the entire screen is sym-
metrical left and right.

M BOW

S BOW

GREEN HORIZONTAL SYMMETRICAL PIN DISTORTION
ADJUSTMENT

1. Adjust the pin distortion at both sides of the center section of

the screen with GH MPIN.

2. Adjust the pin distortion at both end sections of the screen

with GH PIN.

3. While tracking, adjust with GH MPIN and GH PIN so that

the PIN of vertical lines on the entire screen have no bowing.

4. If there is asymmetrical pin distortion after the GH MPIN

and GH PIN adjustments, adjust with GH MBOW and GH
SBOW while tracking.

 With just the PIN AMP adjustment in MAIN, if there is no

need to adjust GV PIN in SUB, this can save power.

M PIN

PIN

GH MBOW

GH PIN

GH SBOW

GH MPIN

GREEN VERTICAL WAVE (TERTIARY DISTORTION)
ADJUSTMENT

1. Take the screen top and bottom horizontal lines with GV

WAVE and find the secondary and quaternary waveform.

2. There is KEY distortion after the GV WAVE adjustment, so

adjust withRGV WAVE and RGV KEY while tracking.

GH MBOW

GH MPIN

GV WAVE

GV KEY

Содержание KP-48V75 - 48" Color Rear Video Projector

































































































Отзывы: