Sony Jumbotron JME-UA200, Руководство по обслуживанию

Страница: 10 / 56

1-6 (E)
JME-UA200
10
SIGNAL OUT COM SENSOR
AC IN
Locations and Functions of Parts and Controls
Rear panel
1
SIGNAL OUT connector (D-sub 15-pin)
Connect a JumboTron display unit to be adjusted.
2
COM connector (D-sub 9-pin)
Connect a computer to display the data for
demonstration.
3
SENSOR connector (Half-pitch 20-pin)
Connect a sensor (not supplied).
4
AC IN connector
Connect the AC power supply of 100–240 V.
Use the supplied AC power cord which fits the AC
outlet in your area.
1 2 3 4
11
Connecting a JumboTron display unit
Connect a JumboTron display unit to the SIGNAL OUT connector.
When measuring the luminance or making an automatic luminance
adjustment, connect a sensor (not supplied) to the SENSOR connector.
Be sure to turn off the power of the controller before connecting the
sensor.
Connecting several JumboTron display units
You can combine several units as a small screen and connect them to the
controller for a simple demonstration. Press the DEMO button on the
controller to perform demonstration. Up to 16 units can be connected.
Connections
to 100 –240 V AC
JTU-35 JumboTron
display unit (rear)
LDU-15 JumboTron
display unit (rear)
Sensor (not
supplied)
SIGNAL OUT
SENSOR
Screen for demonstration (rear)
SIGNAL OUT
to 100 –240 V AC