A
d
mini
s
tra
ting
t
he
un
it
Sending an Image via E-mail — e-Mail (SMTP) Menu
62
SMTP port number
Select the textbox and enter a port number from 25 to
65535.
Use TLS
To use the encryption function by TLS, select
On
.
Note
TLS is not featured in the models to Chinese markets.
STARTTLS
To use the encryption function by STARTTLS, select
On
.
Note
STARTTLS is not featured in the models to Chinese
markets.
Authentication
Select whether authentication is required when you send
an e-mail.
Off:
No authentication is required when an e-mail is
sent.
On:
Authentication is required when an e-mail is sent.
Select one of the authentication methods from the
following and specify the
POP server name
,
User
name
and
Password
as required.
SMTP:
Select when SMTP authentication is
required.
POP before SMTP:
Select when POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, be sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP mode
Select POP3 or APOP (encrypted authentication).
Note
APOP is not featured in the models to Chinese markets.
Waiting time after POP authentication
Set the timeout duration. Timeout duration can be set
from 1 to 10000 msec.
POP server name
This is necessary when
POP before SMTP
is selected
for
Authentication
.
Type the POP (receiving mail) server name using up to
64 characters, or type the IP address of the POP server.
This setting is necessary when the SMTP server that
sends e-mails performs authentication using the POP
user account.
POP port number
Enter a port number from 110 to 65535.
Authentication mode
Set the user authentication mode.
If you do not use CRAM-MD5, select
Login
.
Note
CRAM-MD5 is not featured in the models to Chinese
markets.
User name, Password
Type the user name and password of the user who owns
the mail account using up to 64 characters. This setting
is necessary when the SMTP server that sends e-mails
performs authentication.
Recipient e-mail address
Type the recipient e-mail address using up to
64 characters.
You can specify up to three recipient e-mail addresses.
Administrator e-mail address
Type the Administrator e-mail address using up to
64 characters.
This address is used for reply e-mails and sending
system messages from the mail server.
Subject
Type the subject/title of the e-mail using up to
64 characters.
When
Alarm sending
of the Alarm sending tab is set to
On
, an e-mail sent in response to alarm detection will
indicate the type of alarm in the subject.
(S1)
is added
for sensor input 1 detection,
(S2)
for sensor input 2
detection,
(S3)
for sensor input 3 detection,
(S4)
for
sensor input 4 detection,
(MD)
for motion detection and
(AD)
is additionally available for audio detection.
Message
Type the text of the e-mail using up to 384 characters. (A
line break is equivalent to 2 characters.)
OK/Cancel
