Ot
her
s
Using the SNC audio upload tool — Transmitting Audio to unit
110
Notes
• Audio transmission stops if you switch the tab during
transmission.
• Audio may be interrupted when the IP address is
changed if
Obtain an IP address automatically
(DHCP)
is set on
IP address
in the Network menu.
• Audio may be interrupted if you transmit it to many
video network stations simultaneously.
Sound adjustment and indicators
Adjust the microphone input volume by moving the
slider bar. You can adjust the volume even
during transmission.
Click
to enable/disable sound muting. The
microphone input volume level is displayed.
The transmission rate is displayed in the Bitrate box.
Click this button to hide the camera list. Click it again to
display the camera list.
Target camera(s) (Camera list)
Displays the cameras selected with the camera select
checkbox of the camera list in the Setting tab.
The list shows the information and status of the selected
video network stations.
IP address:
Displays the IP address of the video
network station. “DHCP” is shown at the end of the
IP address when the IP address is obtained with a
DHCP server.
Tip
During SSL communication,
appears on the left side
of the IP address of the video network station.
The model on sale in China does not support the SSL
function.
Model:
Displays the model name of the video network
station.
Serial:
Displays the serial number of the video network
station.
Status:
Displays the current status of the video network
station.
Ready:
The camera is ready for connection.
Connected:
Camera connection was successful.
Fault:
Camera connection failed.
Sending:
Audio data is being transmitted.
Voice alert tab
Use this menu to record sound via a microphone
connected to the computer, and upload the recorded
audio file to the unit. You can upload the audio file to
multiple video network stations selected from the unit
list simultaneously.
(playback)
To start playback, open the recorded file or another
audio file and click this icon.
You can check the recorded sound or the contents of the
selected audio file. During playback, the progress bar
shows playback progress.
(stop)
Click to stop recording or playback.
When you click it during recording, recording stops, and
you can review the recorded sound or upload the
recording to the video network station.
When you click it during playback, playback stops and
the progress bar returns to the start position.
(recording)
Click to start recording of sound via the computer’s
microphone. Maximum recording time is 30 seconds.
The codec specified in the Setting tab is used for the
recording.
The recorded file is displayed as “RecordedFile.vof.”
Notes
• Recording or playback stops if you switch the tab
during recording or playback.
• The recorded file is not stored in the computer.
