A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera Menu
43
Setting the Camera
Image and Audio
— Camera Menu
When you click
in the Administrator menu, the
Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of six tabs:
Common
,
Picture
,
Privacy masking, Day/Night, Video codec
and
Streaming
.
Common Tab
Color
Select
Color
or
Monochrome
for the image.
Zoom mode
Selects the zoom mode.
SNC-RH124, SNC-RH164
Full:
An image can be zoomed up to 10× optical zoom
and 12× digital zoom, 120× zoom in total.
Optical:
An image can be zoomed up to 10× optical
zoom.
SNC-RS46N/P, SNC-RS86N/P
Full:
An image can be zoomed up to 36× optical zoom
and 12× digital zoom, 432× zoom in total.
Optical:
An image can be zoomed up to 36× optical
zoom.
SNC-RS44N/P, SNC-RS84N/P
Full:
An image can be zoomed up to 18× optical zoom
and 12× digital zoom, 216× zoom in total.
Optical:
An image can be zoomed up to 18× optical
zoom.
Focus mode
Select the focus mode.
Auto:
The focus is automatically adjusted.
Manual:
The focus can be adjusted by using the
,
and
buttons of the control panel
displayed in the main viewer.
Audio codec
Select whether you are going to send audio from the
m
microphone input connector. Select
On
to send the
audio from the network camera.
Note
When you change the
Audio codec
setting, click
Refresh
on the Web browser to reflect the change on the
opening main viewer page.
Audio in
Select microphone input or line input.
Mic volume
Set the volume level of the audio input from the
m
microphone input connector. It is adjustable from
–10
to
+10
.
Codec
Select the bit rate of audio from the
m
microphone input
connector.
G.711 (64kbps)
,
G.726 (40kbps)
,
G.726
(32kbps)
,
G.726 (24kbps)
or
G.726 (16kbps)
can be
selected.
Note
No audio is output if JPEG or JPEG/FLASH is used for
the Plug-in free viewer.
Echo canceler
Select
On
to reduce echo from audio transmission.
Ambient noise filter
Select
On
to use Audio noise reduction filter.
Dynamic range compressor
Select
On
to use dynamic range compressor.
Audio upload
Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer’s audio input terminal from a powered speaker
connected to the line output jack of the camera.
Select
On
to output audio from the speaker.
Volume
Set the speaker volume level from
– 10
to
+ 10
.
OK/Cancel
See “Buttons common to every menu” on page 34.
Camera
