Sony IPELA SNC-DM110, Руководство по обслуживанию

Страница: 35 / 80

4-5
SNC-DS10/DM110
No
Check the attaching
condition of the BI board
and varifocal lens.
Yes
No
No Yes
Change the setting of
[Camera]-[Picture]-
Saturation.
In the case of
SNC-DM110
In the case of
SNC-DM110
In the case of
SNC-DS10
In the case of
SNC-DS10
Change the color setting
to “Color”.
Failure of harness (coaxial
cable (
*
1)), CN101 on the
BI board or CN808 on the
SY board.
Replace the defective parts.
From page 4-4
Abnormal color
Adjust the VSUB voltage.
(Refer to Section 2-2-2.)
Yes
Check each setting of
[Camera]-[Picture]-Exposure
and the Gamma setting.
Yes
Cancel the image
cropping setting.
No color
Abnormal color
Inverted hue
Severe level of white-out
(overexposed) and
black-out (underexposed)
Abnormal tone Sparse tone
Abnormal angle of view
m
*
1: 1-966-137-11: BI board, CN101
5
SY board, CN808
*
2: For details of the setting procedure, refer to “User’s Guide”.
*
2
*
2
*
2
*
2
*
2
*
2
*
2
*
2
Is the setting of
[Camera]-[Video codec]
set to the image cropping?
Is [Camera]-[Common]-
Color set to “Color”?
Is the setting of
[System]-[Installation]-
Iris open set to OFF?
Is the symptom changed
by ON/OFF of
[Camera]-[Sense up]-
Light funnel mode?