Sony IPELA SNC-DM110, Руководство по обслуживанию

Страница: 16 / 80

2-4
SNC-DS10/DM110
2. Operate the spin box so that the voltage value of the
voltmeter matches the value displayed in the lower
area of the adjustment software window.
3. Click the
[OK]
button.
4. Check that “OK” is displayed in the upper right area of
the window, and then click the
[Next]
button.
Spin box
2-2-2. VSUB Voltage Adjustment
(Only SNC-DM110)
n
You can check the imprint of CCD used in this adjustment
from the side B of the BI-224 board. Before starting the
procedure, disassemble this unit so that you can check the
BI-224 board and write down the imprinted letter. Be sure
to read the letter from the direction as shown in the picture.
.
Subject: None
.
Measurement device: Voltmeter
.
Specification: Displayed in the lower portion of
the adjustment software window.
1. Select the letter imprinted on the backside of CCD (“f”
in the above picture), then click the
[OK]
button.
Imprinted letter
List box
Specificaion