Sony Ipela SNC-CS50N, Руководство по обслуживанию

Страница: 31 / 76

2-15 (E)
SNC-CS50N/CS50P
Yes No
(2) The message box below is displayed when saving in
EEPROM is completed. Click the
[OK]
button.
n
When incorrect defect information was saved in
EEPROM, perform steps (a) and (b) below to return to
the factory-setting state (in which no defect
information is contained) and then return to step 2 (the
setting of a defect threshold value).
(a) Click the
[Preset|ROM]
button on the defect
correction mode window.
The message box below is displayed. Click the
[Yes]
button.
(b) The message box below is displayed when
initialization is completed. Click the
[OK]
button.
5. Termination processing
(1) Click the
[Close]
button on the defect correction
mode window.
The message box below is displayed. Click the
[OK]
button.
(2) Turn off the power of this unit and remove this unit.
(3) Set the switch (S651) on the PR-291 board to the rear
position of this unit.